Supported by the Arborcentre

UKTC Archive

Top 21 Gardening Sites
tree-care.info for tree advice

Re: Working at height regs

Subject: Re: Working at height regs
From: Dan
Date: Dec 06 2004 20:05:28
Howdy,
I think Bill had something to say to say about this several months ago.  For
my humble..platforms can make a job quicker, and so be cost effective.  But
it is an extra bit of kit (unless you have the Asplandh model that is on a
tipper - anybody make that type of thing here?) and I may be wrong but the
use can still be discounted upon business or practical grounds.  There again
would one have to use skilled/qualified/experienced arborists or just
someone cheap with a certified use of the MEWP and a saw-on-a-stick?
One company that I work for is going to hire a 25m MEWP for 6 months to see
whether it's worth buying one again depends on the type of work.
The other reservations I have is that if top handled saws are not to be used
and no chainsaw use within 5m of another person there will be more rules
flouted, still down to clients/HSE I suppose.  Will add there was a (IMO) a
ridiculous suggestion that an operator had to be certified on each type of
platform that he/she uses, anyway gone off the point a bit.
I don't believe costs will go up providing there is enough of the right type
of work for the equipment.
Regards Dan
----- Original Message ----- 
From: "John Flannigan" <John.Flannigan@xxxxxxxxxxx.gov.uk>
To: "UK Tree Care" <uktc@xxxxxx.tree-care.info>
Sent: Monday, December 06, 2004 9:29 AM
Subject: Working at height regs


Hi all

More a question for clients I suppose but as ever all outlooks welcomed.

I'm wondering how any one in long term contracts is going to address the
prickly issue of likely increased costs of MEWPs etc especially as not one
MEWP will cover all eventualities. I'm at the thinking about it stage so,
unhelpfully, I have nothing to contribute.

John

-----Original Message-----
From: chris.hastie [mailto:Chris.Hastie@xxxxxxxxxx.gov.uk]
Sent: 01 December 2004 12:41
To: UK Tree Care
Subject: RE: Hazard Rating Calculation

On 01 December 2004 12:04, Robin Hassall wrote:

I'm not clear what sort of system you are referring to Robin.
However, I would suggest that if there is some chance of a passer-by
passing by, then the target score is not zero. It may be very small,
but it is not zero. That is the difficulty.

The system I am referring to is THREATS as devised by Julian
Forbes-Laird and which proposes the use of a formula which multiplies
the 3 parameters together without any provision to prevent a zero
answer.

I'm am not specifically familiar with the figures used by THREATS, but
perhaps you should consider some alternatives if the methodology doesn't
stand up to detailed scrutiny. It is certainly not a system with
widespread and uncritical acceptance within the industry.



If the probability of someone / thing being there when the tree fails
really is nil, then it is quite right that the final 'hazard rating'
be nil.

Where do you find such places in reality? Airports? Railway lines?
but even then people are around.


This is not the point. If such a place really existed, then it would be
valid to rank the target as zero. In reality, whilst a suitable figure
might move towards zero, it rarely reaches it other than on Mars.

I agree that it is not wrong to allow the inspector to rate a risk as
zero so long as that zero does not zero everything else by its use
in a formula.

No. You are missing the point. If the probability of a target being
present when the tree fails is zero, then the risk posed by the tree is
zero. This is not arguable. It is the nature of probability.

If the probability of there being target is non-zero, then it should not
be entered as zero. If THREATS suggests otherwise it is flawed.

By setting a base value of one for each parameter as shown
below the problem
is easily circumvented and the inspector can rate risks as
zero according to
the THREATS system without fear of 'deleting' all the other values
scored when it is applied in the formula.

Setting a base value of 1 skews everything. a.b.c != (a+1).(b+1).(c+1)
no matter what the values of a, b and c.

An unfortunate passer by is killed by the falling branch.

I.e. the target should not have been rated zero.

Yes! That is why I am proposing the formula should be changed.


NO. Do not amend the formula. Amend the data you input. If your users
can not tell the difference between zero and very small, they should not
be undertaking the task.


It
was an unlikely
event but in my opinion to allow that tree to be scored as
having a Hazard
rating of zero would be quite wrong and misleading.

What's the difference? Do it right and give the target a rating of
.000000000001. Then the hazard rating is non-zero, but it is still so
small that you will take no action. If the target occupation is that
low, then taking no action is legally defensible.

There is a huge difference!!
If you were to put in such a figure it only emphasises my
point as when
applied in the present formula it would suggest the overall hazard to
be infinitesimal when clearly it is not!

Yes it is infinitesimal. You're really not getting this are you? If the
risk of there being a target is tiny then that WILL push down the risk
of damage, perhaps as far as infinitesimal. If only one person walks
past the tree once every ten years, and it takes 5 seconds to get
passed, what is the chance of a person being around when the tree fails?
1 in 63115200, that's what. Or about 0.000000015. Considerably less than
the chance of a lottery ticket hitting the jackpot. It doesn't matter if
it's a dead cert that 5 tonnes of tree is going to come crashing down
soon. The chance of it hitting someone IS infinitesimal. It is entirely
reasonable to leave the tree. In fact, it would be entirely reasonable
with a tree like that not to bother inspecting it all.

Yes, it might kill someone. And I might be a millionaire by this time
next week. But I'm not holding my breath.

And to the extent that the probability of damage is infinitesimal and
negligible, it is perhaps a valid approximation to call it zero.


I know it sounds far fetched and that the user should employ
more common
sense but, because I work with computer software, I know how
easy it is for
people to key in uncertain data and expect miracles from a
report!!

Which is why the user should be a competent arb who knows what they
are doing and fully understands the implications of that.

Then why should the paper I have in front of me advocate this
procedure if it contradicts training given to a competent arb?


I couldn't possibly comment.

-- 
Chris Hastie
Strategy Officer (Arboriculture)
Warwick District Council


----------------------------------------------------------------------
--
-----------------------------
Any opinions expressed in the E-mail are those of the individual and
not necessarily those of Warwick District Council. This E-mail and
any files with it are confidential and solely for the use of the
intended recipient. If you are not the intended recipient or the
person responsible for delivering to the intended recipient, please
be advised that you have received this E-mail in error and that any
use is strictly prohibited.
----------------------------------------------------------------------
--
-----------------------------


-- 
The UK Tree Care mailing list
To unsubscribe send mailto:uktc-unsubscribe@xxxxxx.tree-care.info

The UKTC is supported by The Arbor Centre
http://www.arborcentre.co.uk/


*********************************************************
PRIVACY AND CONFIDENTIALITY NOTICE
*********************************************************
The information contained in this email transmission is intended by North
Somerset Council for the use of the named individual or entity to which it
is directed and may contain information that is privileged or otherwise
confidential.  If you have received this email transmission in error, please
delete it from your system without copying or forwarding it, and notify the
sender of the error by reply email.

Any views expressed within this message or any other associated files are
the views and expressions of the individual and not North Somerset Council.

North Somerset Council takes all reasonable precautions to ensure that no
viruses are transmitted with any electronic communications sent by us,
however we can accept no responsibility for any loss or damage resulting
directly or indirectly from the use of this email or any contents or
attachments.

Website       www.n-somerset.gov.uk
Main switchboard       01934 888888

****************************************************************************

______________________________________________________________________
TREE SERVICES MANAGER - GBP 24,648-GBP 26,702 plus Essential User Car
Allowance
Leading small & enthusiastic team you will be responsible for overall
management of trees, planning issues & Tree Preservation Orders.
Three years local government experience & at least a National Diploma in
Arboriculture, or degree in arboriculture or equivalent.
Application form & further details can be found on www.eastleigh.gov.uk
Closing date: 31 December 2004        Interview date: 17 January 2005
______________________________________________________________________
-- 
The UK Tree Care mailing list
To unsubscribe send mailto:uktc-unsubscribe@xxxxxx.tree-care.info



______________________________________________________________________
TREE SERVICES MANAGER - GBP 24,648-GBP 26,702 plus Essential User Car 
Allowance
Leading small & enthusiastic team you will be responsible for overall
management of trees, planning issues & Tree Preservation Orders.
Three years local government experience & at least a National Diploma in
Arboriculture, or degree in arboriculture or equivalent.
Application form & further details can be found on www.eastleigh.gov.uk
Closing date: 31 December 2004        Interview date: 17 January 2005
______________________________________________________________________
-- 
The UK Tree Care mailing list
To unsubscribe send mailto:uktc-unsubscribe@xxxxxx.tree-care.info


Current thread

  • Working at height regs
    John Flannigan, Dec 06 2004 09:27:37
    • Re: Working at height regs
      Dan, Dec 06 2004 20:05:28